Monday, 21 April 2014

Recent Project : Planters' Haven

The area of coverage for this lot of bungalow land is massive. Both drip and pop up sprinklers were installed.

The system were installed during the dry season in February 2014. Note the green grass around the house compound due to the Sprinkler System installation after merely 2 weeks.

Recent Project : Titiwangsa

Another project in KL area. It is a nice bungalow house near Tasik Titiwangsa. 

The project is quite interesting because the owner has Rain Water Harvesting System. Basically, all the water from the roof is channel to a underground concrete tank (about 1500 gallons water). Grundfos pump and water filter were used for the system.

Both drip and sprinkler system were installed. Both Rainbird Rotor and Hunter Spray were used.

Drip System 

Recent Project : Nilai

The owner requested for Automatic Underground Pop Up Sprinkler for their corner lot terrace house. The existing landscape is very beautiful. Thus, Sprinklerhouz made sure the grass and soil were dug systematically for piping and sprinklers placement.

The bottom pictures were taken after installation and you can hardly see that the grass were dug for pipe layering (HDPE)

The system is relatively simple. Water source is direct from Syabas water supply with 25 psi water pressure. 2 water timers were used for 2 Rainbird rotors and 2 Hunter spray.

Battery operated timer were used. We recommend the battery(AA size) to be changed every 6 months.

Recent Project : Sri Kembangan

We will share some of the recent project executed by Sprinklerhouz. The first of the series is from Sri Kembangan.

The client requested for automatic irrigation system for the whole bungalow. Both drip and underground pop up sprinkler system were recommended to fulfill the requirements.

Both Rainbird and Hunter Sprinklers were used accordingly based on the area of coverage. Rainbird 5000 Rotor were used for 25-30ft radius while Hunter Pro Spray were used for 8-12ft radius.

A total of six water timers from two water source were used for the whole system. Water supply direct from Syabas. No pump and water tank were used. 

Water pressure is about 25-30 psi. This enabled combination of two rotors or four spray to be used for each water timers.